Assembler B
Moseley Technical Services, Inc.

Job Info

---

Check out this new opportunity!

Assembler B

North Charleston, SC

Contract Position

$26.42/Hour

We have partnered with the world's most renowned Aerospace company since our company was founded 28 years ago. From design and creation of over 10,000 active commercial aircraft to keeping our nation safe our successful partnership from the invaluable environment created for the employee. Working with the industry leader provides you with the state of the art work facilities, and a map for career growth into the future.

Let us help you to elevate your career by joining our team!

Responsibilities:

• Select correct parts, materials, tools, assemblies, standards, hardware, etc.
• Install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations.
• Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with company procedures.
• Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead.
• Remove and/or replace installed components and any related parts.
• Drill close tolerance holes in composites, Tool indexing, Gap measurement.
• Read and understand blueprints, drawings, schematics, engineering dispositions and instructions.
• Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards.
• Maintain clean, neat, organized and FOD free work area.
• Perform routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.
• Contact with sealants and solvents, exposure to noise, working on elevated platforms
• Use personal protective gear for face, eyes, ears, hand, and arms as required.
• Pass visual acuity and color perception tests
• Read, write, and comprehend the English language
• Handle, use, and dispose of hazardous material
• Obtain & maintain training certifications as required to support assignment responsibilities
• Functional Excellence Competencies
  
  • Accountability and Responsibility
    Demonstrates a willingness to accept responsibility and accountability for one's actions.
  • Exhibits a moral, legal or mental accountability in areas of responsibility.
• Adaptability
  • Maintain effectiveness when experiencing major changes in work tasks or the work environment; adjusts effectively to work within new work structures, processes, requirements, and/or cultures.
• Change Management
  • Encourage others to seek opportunities for different and innovative approaches to addressing problems and opportunities; facilitates the implementation and acceptance of change within the workplace.
• Continuous Improvement
  • Originate action to improve existing conditions and processes; use appropriate methods to identify opportunities, implement solutions, and measure impact.
• Continuous Learning
  • Demonstrate an interest in personal learning and development.
  • Seek feedback from multiple sources about how to improve and develop; modify behavior based on feedback or self-analysis of past mistakes.
  • Take steps to develop and maintain the knowledge, skill, and ability to perform.
• Innovation / Creativity
  • Discovers new opportunities and solutions for problems by looking beyond current practices and using innovative thinking.
  • Tries different and novel ways to deal with work problems and opportunities.
• Planning and organizing
  • Effectively plan what is to be achieved and involve all relevant stakeholders.
  • Anticipate important or critical events, identifying resource requirements and assigning responsibility for specific work, including deadlines and performance expectations.
  • Demonstrate the use of information -gathering techniques, analyzing situations and identifying implications in order to make correct decisions.
  • Demonstrate ability to monitor progress and to make changes as required.
• Strategic Decision Making
  • Obtain information and identifies key issues and relationships relevant to achieving a long-range goal or vision; commit to a course of action to accomplish a long-range goal or vision after developing alternatives based on logical assumptions, facts, available resources, constraints, and organizational values.
    
• Teamwork
  • Demonstrate a commitment to the mission and motivation to combine the team's energy and expertise to achieve a common objective.
  • Understand the dynamics of effective teamwork in order to attain higher levels of performance.
  • Demonstrate ability to work as a member of a team.
• Technical Competencies
• Assembly Process
  • Knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures), and data needed for defining delivery configurations (e.g., design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, supplier data).
  • Ability to differentiate production (manufacturing) processes and requirements from in-service procedures and requirements.
• Certification & Qualification
  • Knowledge of verification, validation, certification and qualification processes and procedures, including knowledge of governing regulations and compliance requirements.
  • Ability to assess and document test or analysis data to show compliance.
    
• Electrical Test
  • Knowledge of electrical test methodology (e.g., stand alone bench, automated, integration laboratory, simulation, functional test), planning, procedures, equipment (e.g., multimeter, oscilloscope, bus analyzer, automated test systems) and result validation criteria (e.g., pass/fail, control limits, tolerances).
• Electronics & Electro-Mech
  • Knowledge of electronics and electro-mechanical assemblies and the ability to solve problems.
    
• Engineering Drawings & Specs
  • Read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
• General Shop Processes
  • Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).
• General/Precision Test & Meas
  • Knowledge of electrical/electronic, general purpose and precision measuring test equipment (e.g., Optical Time Domain Reflectometers (OTDR), multimeters, oscilloscopes, noise/bus/logic/spectrum analyzers, calipers, micrometers, etc.) and associated calibration requirements.
• Hydraulic Power/Actuation Sys
  • Knowledge of hydraulic power systems equipment (e.g., pumps, accumulators, ram air turbines, distribution) and hydraulic actuation systems (e.g., servo actuators, control valves, actuators, motors, pressure and flow control devices) design, performance and integration.
• Lean Manufacturing
  • Knowledge of Lean Manufacturing principles (e.g., value stream analysis, single piece flow).
• Quality Systems Process
  • Knowledge of quality systems (e.g., inspection process, Boeing quality procedures).
• Systems Thinking
  • Understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area.
  • See and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.
• Troubleshooting
  • Use established physical, mechanical, or scientific principles and perform appropriate tests to identify and solve problems encountered on the job.
  • Locate and isolate the problem, identify possible solutions, and select approaches that are practical and effective.

Qualifications:

• High School Diploma/GED combined with 1 + year of relevant work experience; or an equivalent combination of education and experience.
• Experience understanding and interpreting detailed written and verbal work instructions and processes
  
• Experience understanding and interpreting detailed written and verbal work instructions and processes
• Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time.
• Possess understanding and knowledge of basic computer systems and programs.
• Ability stand for long periods of time, and work in elevated and/or confined spaces as required. Frequent overhead work may be required. Frequent overtime may be required.
• Lift up to 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
• Occasional (1 to 3 hrs) finger manipulation
• On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
• Frequent reaching overhead (3 to 6 hrs)
• Frequent walking on flat surfaces
• Frequent standing flat or uneven surfaces
• Frequent balancing on a ladder, steps, or uneven surfaces
• Occasional climbing on 3-12 ft ladders or stands
• Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
• Occasional contact with metals
• Exposure to plastics and solvents to atmospheric conditions
• Frequent exposure to noise

Your Recruiter

Still have questions? Reach out to

Donna- (phone) (256) 635-2689 (email) donna.maharajh@moseleytechnical.com

What to Expect

• Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
• Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Resources

For more active job openings: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

---